This page is here so you can try your hand at editing a wiki page. Click on edit help to get some background. Here are a few example of things :
- 1 This is a major title
- 2 woot
- 3 Other
This is a major title
A smaller one
a little change
You can link to other pages, for example here is another Sandbox2, also we could simply call it Sandbox even though it is actually Sandbox2... Make a link to anything you think something should be written about in the Wiki, even if that page doesn't exist yet. Someone (maybe you?) can write the page later on. It will appear as a red link to indicate it doesn't exist yet.
You can make a list of things :
- one item
- and another
Lots more things to try, just have a look at the help page, or just try something out.
Add your own stuff below this line : (signature follows!) Cmich 18:35, 6 Mar 2004 (EST)
A numbered list:
- 'single quotes show up as quotes
- double quotes show up as italics
- triple quotes are bold
Note that you can upload pictures (or other files). You just need to explore a bit! Cmich 18:35, 6 Mar 2004 (EST)
A test after software upgrade and change of hosting...
I suspect the server clock is wrong. Let's see... Matthew 11:21, 10 January 2007 (MST) OK, well that's out by exactly an hour (time zone config problem), 10.20am here now, so maybe it's just the forum.
- I've noticed the same thing a few months ago. I've ask Chris Micalak about it and he just said that it's my preferences that are not properly ajusted to the time zone. I went and modified my configs but it doesn't work. Both the Wiki & Message board are off by an hour. Champagne 12:57, 10 January 2007 (MST)
- I think the server time is actually correct. I have my time zone set for Pacific time and the time that I see on the "recent changes" page is the correct local time. However, note that when you guys posted your messages above, the time was stamped using MST (Mountain Standard Time) which is one hour different from PST (Pacific Standard Time). Perhaps some part of the server thinks it's still on daylight savings. I don't know what time zone this post is going to be stamped with, so here it goes . . . Scott Nelson 13:09, 10 January 2007 (MST)
Other Scott's test Scott Webster 13:42, 10 January 2007 (MST)
- My above test has a correct time stamp. Unfortunately it is in MST, which isn't what time zone I am in, but the time is correct. Now I check my prefs.
- tesst 2 Scott Webster 14:50, 10 January 2007 (MST)
- The problem seems to be that the server changes the four tildes into an MST time, and your wiki prefs don't change it to your time zone...
- tesst 2 Scott Webster 14:50, 10 January 2007 (MST)
Ok, fixed the time zone, seeeeeeeeeee: Chris Michalak 16:12, 10 January 2007 (PST)
<googlemap lat="42.711618" lon="-73.205112" zoom="2" controls="small"> 42.711618,-73.205112,the fabulous, famous Sawyer Library 42.711618, -73.205112, the fabulous, famous Sawyer Library (S) 42.711618, -73.205112, the fabulous, famous Sawyer Library </googlemap>
This is the text which you are going to verify with a reference.<ref>Reference details go here</ref>
Notes and references
Test after hosting move
123 again one more time
Let's see if I can link to a crappy proprietary format : File:Test.doc...
Gah, we don't want .doc on here, we'll never be able to read that in the future after Windows Office Vistium ME 2011 comes out. Scott Webster 18:25, 21 November 2007 (PST)
example of bcmaps extension use. Must specify (lat and long) or (north and south and east and west). All others are optional. Parameters and defaults are the same as Scott's template. <bcmap>lat=49.9|long=123.0|scale=105|width=8|height=4</bcmap>
Google maps with paths
Barrier trail: <googlemap version="0.9" lat="49.947796" lon="-123.078632" type="terrain" zoom="13" width="400" height="300" controls="medium"> 6#B2758BC5 49.948652, -123.082538 49.94705, -123.076315 49.947133, -123.06859 49.945752, -123.057947 49.944427, -123.055544 </googlemap>
Start of Spearhead traverse: <googlemap version="0.9" lat="50.073227" lon="-122.838478" type="terrain" width="400" height="300" controls="medium"> 6#B2758BC5 50.090769, -122.877231 50.086391, -122.870321 50.082205, -122.868819 50.081709, -122.867489 50.079258, -122.867961 50.077578, -122.860923 50.077468, -122.854443 50.070803, -122.841439 50.069536, -122.840581 50.066974, -122.839293 50.062539, -122.835217 50.06185, -122.833285 50.058324, -122.832384 50.057166, -122.827363 50.057084, -122.825646 50.056588, -122.824402 50.056946, -122.821398 50.058764, -122.815647 50.058406, -122.806592 50.058131, -122.802429 50.057056, -122.801828 50.055734, -122.801142 </googlemap>
Ok, I upgraded the google maps extension to 0.9.3. Looks like you can now give it a KML file from Google Earth as input if you want to do work in Google Earth.
google maps import kml file
You can now upload a kml file to the wiki (as an image) and then use it to display a google maps. The only caveat is that it has to link to the actual file (rather than the wiki page that controls the .kml file revison). So I think if someone uploads a new revision of the kml file the map will not update itself automatically. You have to go figure out what the new path/name of the file is and edit the code used to generate the google map. Unless by default the new revision uses the same filename/path and it's the old revision that changes names/paths? I don't know. Easy to test...
Note that google maps has a feature to then allow someone to click and download the original kml file used to generate the map. This in turn will launch google earth on the client computer with the contents of the kml file displayed. However this button doesn't appear to exist. It's probably a small tweak to get it to show up... I'll look into it.
<googlemap version="0.9" lat="49.258843" lon="-123.166351" type="terrain" controls="small"> http://www.ubc-voc.com/wiki/images/9/91/Mytest.kml </googlemap>
google maps kml export
Apparently the following code will allow you to download kml files to generate all the maps on this page (or something like that):
well that didn't work so well...
MAP (by Chris M.
Red Heather Shelter interactive map: lat=49.762690803602695, long =-123.03809371881576 <bcmap>lat=49.762470|long=123.03780|scale=200|width=3|height=4|interactive=1|markerlong=123.03809371881576|markerlat=49.762690803602695</bcmap>
Hollyburn lat=49.400555,long = -123.183060 <bcmap>lat=49.400555|long=123.183060|scale=200|width=3|height=4|interactive=1|markerlong=49.400555|markerlong=-123.183060|markerlat=49.400555</bcmap>
test after server move
Testing update to version 1.18.1